Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E03 — Toshiba DP3500

Code: E03

Description: Paper remaining inside the copier at power ON
Remedy: Open the cover of the unit/area whose picture is flashing on the control panel. Is there any paper on the transport path? (Refer to the following table) YES Remove the paper. NO Is the sensor in the jamming area working? (Perform the input check in the test mode: refer to the following table.) NO 1. Check if the connector of the sensor is disconnected. 2. Check if any of the connectors on the LGC board is disconnected. 3. Check if the connector pins are disconnected and the harnesses are open-circuited. 4. Check if the conductor pattern on the LGC board is short- or open-circuited. 5. Replace the sensor. 6. Replace the LGC board. YES Replace the LGC board.
Registration area Jam access cover Registration sensor 03-[FAX]ON/[2]/[A] Upper feed sensor 03-[FAX]OFF/[6]/[E] Exit area Jam access cover Exit sensor 03-[FAX]ON/[2]/[B] ADU ADU ADU entrance sensor 03-[FAX]OFF/[1]/[H] ADU exit sensor 03-[FAX]OFF/[1]/[G] Feeding area Side cover Lower feed sensor 03-[FAX]OFF/[7]/[E] (main unit) LCF LCF side cover LCF feed sensor 03-[FAX]OFF/[5]/[G] PFP PFP side cover PFP upper feed sensor 03-[FAX]OFF/[2]/[D] PFP lower feed sensor 03-[FAX]OFF/[4]/[D] Relay unit Relay unit Relay unit transport sensor-1 03-[FAX]ON/[4]/[H] Relay unit transport sensor-2 03-[FAX]ON/[3]/[E]

← Xem tất cả mã lỗi Toshiba DP3500

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie