Code: E43
Description: ADU opened during printing
Remedy: Is the ADU open? YES Remove the paper if there is any, then shut the ADU. NO Is the ADU opening/closing switch working? (Perform the input check in the test mode: 03-[FAX]OFF/ [1]/[F]) NO 1. Check if the connector of the ADU opening/closing switch is disconnected. 2. Check if either of the connectors CN211 or CN217 on the ADU board is disconnected. 3. Check if the connector J316 on the LGC board is disconnected. 4. Check if the connector pins are disconnected and the harnesses are open-circuited. 5. Check if the conductor patterns on the ADU board and LGC board are short- or open-circuited. 6. Replace the ADU opening/closing switch. 7. Replace the ADU board. 8. Replace the LGC board. YES 1. Replace the ADU board. 2. Replace the LGC board.