Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E3E — Toshiba DP4500

Code: E3E

Description: Paper fed from the LCF not reaching the lower feed sensor
Remedy: Open the side cover. Is there paper in front of the lower feed sensor? YES Remove the paper. NO Is the lower feed sensor working? (Perform the input check in the test mode: 03-[FAX]OFF/[7]/[E] NO 1. Check if the connector of the lower feed sensor is disconnected. 2. Check if the connector J313 on the LGC board is disconnected. 3. Check if the connector pins are disconnected and the harnesses are open-circuited. 4. Check if the conductor pattern on the LGC board is short- or open-circuited. 5. Replace the lower feed sensor. 6. Replace the LGC board. YES Are the transport clutches working? (Perform the output check in the test mode: 03-203, 205) NO 1. Check if the connectors of the transport clutches are disconnected. 2. Check if the connector J311 on the LGC board is disconnected. 3. Check if the connector pins are disconnected and the harnesses are open-circuited. 4. Check if the conductor pattern on the LGC board is short- or open-circuited. 5. Replace the transport clutches. 6. Replace the LGC board. YES Check the transport roller. Replace it if it is worn out.

← Xem tất cả mã lỗi Toshiba DP4500

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie