Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi CC1 — Toshiba DP6570

Code: CC1

Description: Microswitch error
Remedy: [Procedure 1] Check the switch actuator in the entrance door. Are the switch and the sensor being moved correctly? No Correct the mechanism. Yes Check the entrance door switch. Is the switch normal? No Replace the switch. Yes Measure the J1-8 voltage on the saddle stitcher controller board when the entrance door is open.Is there 5V being supplied? No The sensor is broken, so replace it. Yes Measure the voltage across J19-2 (+) and J19-2 (-) on the saddle stitcher controller board. Is 24 V? No Replace the saddle stitcher controller board. Yes Check and correct the wiring between J19 and J1 of the saddle stitcher controller board and replace the saddle stitcher controller board if the wiring is normal. [Procedure 2] Check the switch actuator of the front door. Are the switch and the sensor being moved correctly? No Correct the mechanism. Yes Check the front door switch. Is the switch normal? No Replace the switch. Yes Measure J11-12 voltage access of the saddle switcher controller with the front door open. Is 5V being supplied? No The sensor is broken, so replace it. Yes Replace the saddle stitcher controller board. [Procedure 3] Check the switch actuator of the exit door. Are the switch and the sensor being moved correctly? No Correct the mechanism. Yes Check the exit door switch. Is the switch normal? No Replace the switch. Yes Measure J11-9 voltage access of the saddle stitcher when the exit door is open. Is it 5V ? No The sensor is broken, so replace it. Yes Replace the saddle stitcher controller board.

← Xem tất cả mã lỗi Toshiba DP6570

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie