Code: E7-02
Description: LSU trouble
Causes: The BD signal from the LSU cannot be detected in a certain cycle. (Always OFF or always ON)
- LSU connector or LSU harness defect or disconnection
- Polygon motor rotation abnormality
- Laser beams are not generated.
- MCU PWB abnormality
- LSU connector or LSU harness defect or disconnection
- Polygon motor rotation abnormality
- Laser beams are not generated.
- MCU PWB abnormality
Remedy: Check connection of the LSU connector. Execute SIM 61-03 to check the LSU operations. Check that the polygon motor rotates normally. Check that the laser emitting diode generates laser beams. Replace the LSU unit. Replace the MCU PWB.