Code: H4-00
Description: Heat roller low temperature detection
Causes: The fusing temperature does not reach 185°C within 27 sec of turning on the power, or the fusing temperature keeps at 140°C.
- Thermistor abnormality
- Heater lamp abnormality
- Thermostat abnormality
- Control PWB abnormality
- Thermistor abnormality
- Heater lamp abnormality
- Thermostat abnormality
- Control PWB abnormality
Remedy: Use TC 5-02 to check the heater lamp blinking operation. When the lamp blinks normally. Check the thermistor and its harness. Check the thermistor input circuit on the control PWB. When the lamp does not light up. Check for disconnection of the heater lamp and the thermostat. Check the interlock switch. Check the power PWB and the lamp control circuit on the MCU PWB. Use TC 14 to clear the self diagnostic display.