Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E03 — Toshiba e-Studio 166

Code: E03

Description: Power-ON jam: The paper is remaining on the paper transport path when power is turned ON.
Remedy: Open the cover of the unit/area whose picture is blinking on the control panel. Is there any paper on the transport path? (Refer to the following table.)
YES Remove the paper. NO Is the sensor in the jamming area working? (Perform the input check in the test mode: refer to the following table.)
NO 1) Check if the connector of the sensor is disconnected. 2) Check if any of the connectors on the MAIN board is disconnected. 3) Check if the connector pins are disconnected and the harnesses are open circuited. 4) Check if the conductor pattern on the MAIN board is short circuited or open circuited. 5) Replace the sensor. 6) Replace the MAIN board.
YES Replace the MAIN board.
Relation between the jamming area and the corresponding sensors and covers (If a jam is occurring in the PFU, check the PFU board.)
Registration area Transfer cover Registration sensor 03-[INTERRUPT]OFF/[9]/[6]
Exit area Transfer cover Exit sensor 03-[INTERRUPT]OFF/[9]/[5]
PFU PFU side cover PFU feed sensor 03-[INTERRUPT]OFF/[7]/[5]

← Xem tất cả mã lỗi Toshiba e-Studio 166

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie