Code: E40
Description: Transfer cover open jam: The transfer cover has opened during printing.
Remedy: the ADU cover open?
YES Remove paper there any, then close the cover. Is the voltage 24V being supplied from the power supply unit? (Perform the input check the test mode: 13-[04. SENSOR TEST])
NO 1) Check if the connector for 24 V power supply is disconnected. 2) Check if the connector CN23 on the MAIN board is disconnected. 3) Check if the connector pins are disconnected and the harnesses are open circuited. 4) Check if the conductor pattern on the MAIN board is short circuited or open circuited. 5) Replace the MAIN board.
YES Replace the MAIN board.
YES Remove paper there any, then close the cover. Is the voltage 24V being supplied from the power supply unit? (Perform the input check the test mode: 13-[04. SENSOR TEST])
NO 1) Check if the connector for 24 V power supply is disconnected. 2) Check if the connector CN23 on the MAIN board is disconnected. 3) Check if the connector pins are disconnected and the harnesses are open circuited. 4) Check if the conductor pattern on the MAIN board is short circuited or open circuited. 5) Replace the MAIN board.
YES Replace the MAIN board.