Code: C45
Description: Thermistor abnormality during printing: Abnormality of the thermistor is detected during printing.
Remedy: Check item: Edge thermistor • Connector check • Check if the edge thermistor is in contact with the surface of the fuser roller properly. • Harness check MAIN board • Board check • Connector check (CN17) • Harness check
Parts to be replaced: MAIN board
Clear the status counter Change the current status counter value (setting mode: 400) “6” to “0”.
Parts to be replaced: MAIN board
Clear the status counter Change the current status counter value (setting mode: 400) “6” to “0”.