Code: 913
Description: Fuser fan (FUFAN) error
Remedy: 1 Turn printer off and remove I/O board shield. Is cable properly connected to I/O board connector DCN7? Go to step 2. Properly connect cable. 2 Ensure rear cover assembly cover is shut. Override top and front cover interlock switches. For location, Reconnect operator panel. Turn printer on and check for 24VDC between DCN7pin 10 and power ground (you can touch negative lead of voltmeter to metal bracket that holds I/O board to obtain ground.) Is voltage present and correct? Replace rear cover assembly. Retest printer. If error clears, problem solved, else go to step 3. Replace I/O board. Retest printer. If error clears, problem solved, else go to step 3. 3 Turn printer off and check cable that connects engine controller board connector I1CN to I/O board connector DCN1 for continuity and pin shorts. Is cable okay? Replace engine controller board. Replace cable.