Code: 930
Description: Laser power error
Indicates that printhead laser output is low.
Indicates that printhead laser output is low.
Remedy: 1 Check LCN connection on laser assembly LDU board. Is connector properly connected? Go to step 2. Properly connect LCN cable. If error clears, problem solved, otherwise go to step 2. 2 Check LCN connection on engine controller board. Is cable properly connected? Go to step 3. Properly connect LCN cable. If error clears, problem solved, otherwise go to step 3. 3 Check cable that connects engine controller board LCN and LDU LCN connectors for continuity and shorted pins. Is cable okay? Replace laser unit assembly. “Laser unit assembly (printhead) removal” on page 4-24. Go to step 4. Replace cable. Go to step 4. 4 Does error clear? Problem solved. Replace engine controller board.