Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 992 — Toshiba e-Studio 180CP

Code: 992

Description: Cleaning roller clutch error
Indicates a problem with transfer unit cleaning roller clutch cable connection.
Remedy: 1 Turn printer off and remove printer right cover. Disconnect transfer belt cleaning roller clutch from cable. Measure resistance between two outer pins on cleaning roller clutch. Does resistance measure between 198 and 242 ohms? Go to step 2. Replace faulty cleaning roller clutch. 2 Remove I/O board shield. Disconnect cable from DCN10 on I/O board. Check cable continuity from DCN10 pins 3 and 4 (cable) to connector that attaches to cleaning roller clutch. Ensure that pins are not shorted. Is cable okay? Replace I/O board. If problem persists, go to step 3. Replace cable. 3 Remove engine controller board shield. Check cable that connects I2CN on engine controller board to DCN3 on I/O board for proper connection, damage, pin shorting, and continuity. Is cable okay? Replace engine controller board. Replace cable.

← Xem tất cả mã lỗi Toshiba e-Studio 180CP

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie