Code: C45
Description: Thermistor abnormality during printing: Abnormality the thermistor detected during printing.
Remedy: 1. Check the edge thermistor (1) Check if the connector is disconnected. (2) Check if the edge thermistor is in contact with the surface of the fuser roller properly. (3) Check if the harness of the edge thermistor is open circuited. 2. Check the MAIN board (1) Check if the connector CN17 is disconnected. (2) Check if the conductor pattern on the board is short circuited or open circuited. (3) Replace the MAIN board. 3. Clear the status counter Change the current status counter value (08-400) “6” to “0”.