Code: E42
Description: PFP cover open jam: The PFP cover has opened during printing.
Remedy: Is the PFP side cover open?
YES Remove the paper there any, then close the cover. Is the PFP side cover opening/closing switch working? (Perform the input check the test mode: 13-[04. SENSORT TEST])
NO 1) Check if the connector of the PFP side cover opening/closing switch is disconnected. 2) Check if either of the connectors CN241 or CN243 on the PFP board is disconnected. 3) Check if the connector CN13 on the MAIN board is disconnected. 4) Check if the connector pins are disconnected and the harnesses are open circuited. 5) Check if the conductor patterns on the PFP board and MAIN board are short circuited or open circuited. 6) Replace the PFP side cover opening/closing switch. 7) Replace the PFP board. 8) Replace the MAIN board
YES Replace the PFP board. Replace the MAIN board.
YES Remove the paper there any, then close the cover. Is the PFP side cover opening/closing switch working? (Perform the input check the test mode: 13-[04. SENSORT TEST])
NO 1) Check if the connector of the PFP side cover opening/closing switch is disconnected. 2) Check if either of the connectors CN241 or CN243 on the PFP board is disconnected. 3) Check if the connector CN13 on the MAIN board is disconnected. 4) Check if the connector pins are disconnected and the harnesses are open circuited. 5) Check if the conductor patterns on the PFP board and MAIN board are short circuited or open circuited. 6) Replace the PFP side cover opening/closing switch. 7) Replace the PFP board. 8) Replace the MAIN board
YES Replace the PFP board. Replace the MAIN board.