Code: E03
Description: Other paper jam. Power-ON jam: The paper is remaining on the paper transport path when power is turned ON.
Remedy: 1 Open the cover of the unit/ area whose picture is blinking on the control panel. Is there any paper on the transport path? (Refer to the following table.) Yes Remove the paper. 2 No 2 Is the sensor in the jamming area working? (Perform the input check in the test mode: refer to the following table.) Yes 3 No 1. Check if the connector of the sensor is disconnected. 2. Check if any of the connectors on the MAIN board is disconnected. 3. Check if the connector pins are disconnected and the harnesses are open circuited. 4. Check if the conductor pattern on the MAIN board is short circuited or open circuited. 5. Replace the sensor. 6. Replace the MAIN board. 3 Replace the MAIN board. Relation between the jamming area and the corresponding sensors and covers (If a jam is occurring in the PFU, check the PFU board.) Registration area Transfer cover Registration sensor 13-[04. SENSOR TEST] Exit area Transfer cover Exit sensor 13-[04. SENSOR TEST] PFU PFU side cover PFU feed sensor 13-[04. SENSOR TEST]