Description: Finisher jam (Bridge unit section) Paper Jam in Printer - Please Clear Paper Path. Paper stopping at the bridge unit transport sensor- 2 jam
Causes: Bridge unit transport sensor-2 (exit sensor) LGC board
Remedy: (exit sensor) • Sensor check (Perform the input check: FS-03-[ALL]OFF[0]/[B]) • Connector check (CN343, J607, J802) • Harness check LGC board • Board check • Connector check (CN343) • Harness check Bridge unit • Does the transport roller of the bridge unit work when the fuser motor is rotated? (Perform the output check: FS-03-113/163) • Check the drive system of the equipment and bridge unit. • Check if the rollers in the exit roller, the pressure spring and the bridge unit are worn out.