Description: Finisher jam Paper Jam in Finisher - Please Clear Paper Path. [MJ-6105] Skew adjustment motor (M1) home position detection error
Causes: Skew adjustment motor (M1) Skew HP sensor (S2) Hole punch control PC board (HP)
Remedy: Paper • Check if there is any paper in the hole punch unit, finisher or the on the transport path of the equipment. Remove it if there is. • Use paper accepted in the specifications. Skew adjustment motor (M1) Rotate skew adjustment motor and fix its mechanism if it does not rotate smoothly. Skew HP sensor (S2) Skew adjustment motor (M1) Hole punch control PC board Check if the connectors on the hole punch controller PC board (HP board) are disconnected from the skew HP sensor (S2) and the skew adjustment motor, or the harnesses are open circuited. Correct if any.