Description: Finisher jam (Saddle Stitcher section) Paper Jam in Finisher - Please Clear Paper Path. [MJ-1110] Stapling error (front) in the saddle stitch unit
Causes: Front saddle stapler drive unit Saddle control PC board (SDL)
Remedy: Paper • Check if there is any paper in the hole punch unit, finisher or the on the transport path of the equipment. Remove it if there is. • Use paper accepted in the specifications. Staple cartridge (front side) • Is the jam released by taking off the front staple cartridge from the Finisher and removing the staple sheet slid from the staple case? Front saddle stapler drive unit • Unit check • Connector check • Harness check Saddle control PC board (SDL) • Connector check (CN2) • Board check