Description: Finisher jam (Saddle Stitcher section) Paper Jam in Finisher - Please Clear Paper Path. [MJ-1110] Paper holder home position detection error in the saddle stitch unit
Causes: Paper holding home position sensor (S38) Paper holding clutch (CLT4) Saddle transport motor (M16) Saddle control PC board (SDL)
Remedy: Paper holding cam • Is there any mechanical problem when the paper holding cam is rotated? Correct if so. Paper holding home position sensor (S38) • Sensor check • Connector check • Harness check Paper holding clutch (CLT4) Check if the harness between the saddle control PC board (SDL) and the paper holding clutch (CLT4) is disconnected or open circuited. Correct if so. (Replace the harness if open circuited. Reconnect the connector securely if there is any disconnection.) Saddle transport motor (M16) Check if the harness between the saddle control PC board (SDL) and the saddle transport motor (M16) is disconnected or open circuited. Correct if so. (Replace the harness if open circuited. Reconnect the connector securely if there is any disconnection.) Saddle control PC board (SDL) • Connector check (CN5) • Board check