Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E130 — Toshiba e-Studio 2006

Code: E130

Description: 1st drawer misfeeding: The paper fed from the 1st drawer does not reach the registration sensor.
Causes: MAIN board Upper drawer feed clutch Upper drawer feed roller Separation roller
Remedy: 1 Open the right cover. Is there any paper on the transport path? Yes Remove the paper. No 2 2 Is the 1st drawer feed clutch working? (Perform the output check in the test mode: 03-201) Yes 4 No • Check if the connector of the 1st drawer feed clutch is disconnected. • Check if the connector CN22 on the MAIN board is disconnected. • Check if the connector pins are disconnected and the harnesses are open circuited. • Check if the conductor pattern on the MAIN board is short circuited or open circuited. • Replace the 1st drawer feed clutch. • Replace the MAIN board. 3 1st drawer feed roller Separation roller • Check the drawer feed roller and separation roller. Replace them if they are worn out.

← Xem tất cả mã lỗi Toshiba e-Studio 2006

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie