Code: E430
Description: Right cover open jam (When ADU is installed): The right cover has opened during printing.
Causes: Right cover opening/closing switch MAIN board
Remedy: 1 Is the right cover open? Yes Remove paper if there is any, then close the cover. No 2 2 Is the voltage of 24V being supplied from the power supply unit? (Perform the input check in the test mode: 03-[6]/[A]) Yes 3 No • Check if the connector for 24 V power supply is disconnected. • Check if the connector CN25 on the MAIN board is disconnected. • Check if the connector pins are disconnected and the harnesses are open circuited. • Check if the conductor pattern on the MAIN board is short circuited or open circuited. • Replace the right cover opening/closing switch. 3 MAIN board • Replace the MAIN board.