Code: E140
Description: PFU drawer misfeeding (Paper not reaching the PFU transport sensor): The paper fed from the PFU drawer does not reach the PFU transport sensor.
Causes: MAIN board Lower drawer feed clutch Lower drawer feed roller Separation roller
Remedy: 1 Open the feed cover. Is there any paper on the transport path? Yes Remove the paper. No 2 2 Is the 2nd drawer feed clutch working? (Perform the output check in the test mode: 03-202) Yes 3 No • Check if the connector of the 2nddrawer feed clutch is disconnected. • Check if the connector CN27 on the MAIN board is disconnected. • Check if the connector pins are disconnected and the harnesses are open circuited. • Check if the conductor pattern on the MAIN board is short circuited or open circuited. • Replace the 2nd drawer feed clutch. • Replace the MAIN board. 3 2nd drawer feed roller Separation roller • Check the drawer feed roller and separation roller. Replace them if they are worn out.