Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi F090 — Toshiba e-Studio 2007

Code: F090

Description: Circuit related service call Memory abnormality on the MAIN board.
Causes: Memory (IC11) on the MAIN board.
Remedy: 1. Turn the power off, and start up the Setting Mode (08). 2. When TEST MODE D is displayed on the control panel, key in code: 9080 and press the [START] key. Notes: Code: 9080 cannot be keyed in except when 08-9010 is ON. To set the 08-9010, if this is the case, key in 08-9010 - [START] - [CLEAR] - key in [1] - [OK]. 3. When SELECT DESTINATION is displayed, use the keys to select a direction and press the [OK] key. 4. When MC=9080 is displayed on the control panel, press the [OK] key. To cancel, press the [CANCEL] key. 5. If SRAM clear ends normally, INITIALISE=OK is displayed on the control panel, it automatically changes to the initial screen of the 08 mode. 6. Perform the initialization after the software version upgrade (08-9030). 7. Display the serial number (08-9601) and check the serial number. Key in the correct serial number using 08-9601 if the serial number is different from the serial number on the identification plate on the back cover. Set the 08-9010 to 0. 8. Turn the power off and then on, if the error is not corrected, replace the SRAM on the main board.

← Xem tất cả mã lỗi Toshiba e-Studio 2007

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie