Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E510 — Toshiba e-Studio 2008A

Code: E510

Description: Jam not reaching the ADU entrance sensor: The paper does not reach the ADU entrance sensor after it is switchbacked in the exit section.
Causes: ADU entrance sensor LGC board Exit motor / Reverse motor Rollers in the ADU Exit roller
Remedy: 1 Open the ADU. Is there any paper in front of the ADU entrance sensor? Yes Remove the paper. No 2 2 Is the ADU entrance sensor working? (Perform the input check in the test mode: FS-03-[ALL]OFF/ [9]/[G]) Yes 3 No • Check if the connector of the ADU entrance sensor is disconnected. • Check if the connector CN321 on the LGC board is disconnected. • Check if the connector pins are disconnected and the harnesses are open circuited. • Check if the conductor patterns on the ADU board and LGC board are short circuited or open circuited. • Replace the ADU entrance sensor. • Replace the ADU board. • Replace the LGC board. 3 Is the exit motor / reverse motor (rotating in reverse) working? (Perform the output check in the test mode: FS-03- 121/171) Yes 4 No [20ppm/25ppm/30ppm] • Check if the connector of the exit motor is disconnected. (J609, J611) • Check if the connector CN324 on the LGC board is disconnected. • Check if the connector pins are disconnected and the harnesses are open circuited. • Replace the exit motor. • Replace the LGC board. [35ppm/45ppm/50ppm] • Check if the connector of the reverse motor is disconnected. (J609, J611) • Check if the connector CN307 on the LGC board is disconnected. • Check if the connector pins are disconnected and the harnesses are open circuited. • Replace the reverse motor. • Replace the LGC board. 4 ADU • Check the rollers in the ADU and the exit roller of the equipment. Replace them if they are worn out.

← Xem tất cả mã lỗi Toshiba e-Studio 2008A

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie