Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E552 — Toshiba e-Studio 2008A

Code: E552

Description: Paper remaining jam on the transport path (when the cover is closed)
Causes: Sensor in the jamming area. LGC board
Remedy: 1 Jamming transport path Open the cover of the unit/area whose picture is flashing on the control panel and remove any paper on the transport path. 2 Sensor in the jamming area • Sensor check (Refer to the table below) • Harness check • Connector check 3 LGC board • Harness check • Connector check • Board check Notes: If the jam is occurring in the ADU, LCF or PFP, check the board in each unit.
Paper path section Side cover Registration sensor FS-03-[ALL]OFF/[9]/[A] 1st transport sensor FS-03-[ALL]OFF/[9]/[B] Fuser Fuser / paper exit unit Exit sensor FS-03-[ALL]OFF/[9]/[C] Reverse sensor FS-03-[ALL]OFF/[9]/[D]

← Xem tất cả mã lỗi Toshiba e-Studio 2008A

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie