Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi EAA0 — Toshiba e-Studio 2008A

Code: EAA0

Description: Paper remaining in Saddle Stitch Finisher: Paper remaining in Saddle Stitch Finisher [MJ-1110]
Causes: Junction box paper detection sensor (S26) Transport path-2 sensor (S27) Transport path-3 sensor (S28) Ejecting roller sensor (S29) Finisher control PC board (FIN) Saddle control PC board (SDL)
Remedy: Paper • Check if there is any paper in the finisher, saddle stitcher or the on the transport path of the equipment. Remove it if there is. • Use paper accepted in the specifications. Do not use the paper shorter than the specification. Junction box paper detection sensor (S26) • Sensor check(S26) • Connector check(CN1) • Harness check Transport path-2 sensor (S27) • Sensor check(S27) • Connector check(CN3) • Harness check Transport path-3 sensor (S28) • Sensor check(S28) • Connector check(CN3) • Harness check Ejecting roller sensor(S29) • Sensor check(S29) • Connector check(CN3) • Harness check Harness Check if the flat cable between the finisher control PC board (FIN) and the saddle control PC board (SDL) is disconnected or open circuited. Correct if so. (Replace the harness if open circuited. Reconnect the connector securely if there is any disconnection.) Finisher control PC board (FIN) • Board check • Connector check(CN21) • Harness check Saddle control PC board (SDL) • Board check • Connector check(CN3, CN6) • Harness check

← Xem tất cả mã lỗi Toshiba e-Studio 2008A

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie