Description: Receiving time-out jam: The printing has been interrupted because of the communication error between the equipment and finisher when the paper is transported from the equipment to the finisher.
Causes: LGC board Harness
Remedy: Finisher • Is the finisher working? • Check if the voltage (24V) is being supplied to the finisher. • Check if the harness connecting the I/F connector of the finisher side and LGC board is open circuited. • Connector check LGC board • Connector check(CN314, J612) • Check if the harness connecting the finisher and LGC board is open circuited. • Check if the conductor pattern on the LGC board is short circuited or open circuited.