Description: Paper remaining on the transport path: The multiple feeding of preceding paper caused the misfeeding of upcoming paper (redetection after no jam is detected at [EB50]).
Causes: Registration sensor LGC board Rollers on the transport path
Remedy: 1 Open the Automatic duplexing unit. Is there any paper in front of the registration sensor? Yes Remove the paper. No 2 2 Is the registration sensor working? (Perform the input check in the test mode: FS-03- [ALL]OFF/[9]/[A]) Yes 3 No • Check if the connector CN318 on the LGC board is disconnected. • Check if the connector of the registration sensor is disconnected. (J659, J660) • Check if the connector pins are disconnected and the harnesses are open circuited. • Check if the conductor pattern on the LGC board is short circuited or open circuited. • Replace the registration sensor. • Replace the LGC board. 3 Roller • Check the rollers. Replace them if they are worn out.