Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi ED16 — Toshiba e-Studio 2008A

Code: ED16

Description: Buffer tray home position error: The buffer tray is not at the home position. [MJ-1109/1110]
Causes: Buffer tray home position sensor (S5) Assist arm motor (M10) Buffer tray guide motor (M2) Finisher controller PC board (FIN)
Remedy: Buffer tray guide Open and close the buffer tray guide. Fix any mechanical problem. Buffer tray home position sensor (S5) Check if there is a disconnection of the connector, incorrect installation or breakage of the buffer tray home position sensor (S5). If there is, reinstall the sensor correctly or replace it. Check if the connector (CN11) on the finisher controller PC board is disconnected from the buffer tray home position sensor (S5) and the harnesses are open circuited. Correct if so. Assist arm motor (M10) Check if the connector (CN10) on the finisher controller PC board is disconnected from the assist arm motor (M10) and the harnesses are open circuited. Correct if so. Buffer tray guide motor (M2) Check if the connector (CN10) on the finisher controller PC board is disconnected from the buffer tray guide motor (M2) and the harnesses are open circuited. Correct if so.

← Xem tất cả mã lỗi Toshiba e-Studio 2008A

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie