Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E711 — Toshiba e-Studio 200L

Code: E711

Description: Jam not reaching the original length sensor: The original fed from the original feeding tray does not reach the original length sensor.
Remedy: Are the pickup roller, feed roller and separation roller stained or worn out? YES Clean the rollers or replace them. NO Is the original excessively curled or folded? YES Flatten and set it again. NO Are the original length sensor and registration sensor working? (Perform the input check: 03-[FAX]ON/[8]/[E], /[7]/[H]) NO 1) Check if the connectors of the original length sensor and registration sensor are disconnected. 2) Check if the connector CN3 on the RADF board is disconnected. 3) Check if the connector pins are disconnected or the harnesses are open circuited. 4) Check if the conductor pattern on the RADF board is short circuited or open circuited. 5) Replace the original length sensor and registration sensor. 6) Replace the RADF board. YES Replace the RADF board.

← Xem tất cả mã lỗi Toshiba e-Studio 200L

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie