Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E724 — Toshiba e-Studio 2020c

Code: E724

Description: Stop jam at the original registration sensor: The trailing edge of the original does not pass the original registration sensor after its leading edge has reached this sensor.
Causes: Registration sensor RADF board Registration roller Replace it if it is worn out.
Remedy: Registration roller Clean the registration roller if it is stained. Registration sensor • Sensor check (Perform the input check: 03-[FAX] ON[7]/[H]) • Connector check (J86, J88) • Harness check RADF board • Board check • Connector check (CN74) • Harness check Original width detection sensor-1 • Sensor check (Perform the input check: 03-[FAX] ON[8]/[F]) • Connector check (J94) • Harness check Original width detection sensor-2 • Sensor check (Perform the input check: 03-[FAX] ON[8]/[G]) • Connector check (J94) • Harness check

← Xem tất cả mã lỗi Toshiba e-Studio 2020c

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie