Code: EA20
Description: Paper transport stop jam: The paper does not pass through the inlet sensor. The paper which has passed through the inlet sensor does not reach the feeding sensor. [MJ- 1101/1106]
Causes: Finisher controller PC board Entrance sensor Transport sensor
Finisher controller PC board
Entrance sensor (S1) Finisher control PC board (FIN)
Finisher controller PC board
Entrance sensor (S1) Finisher control PC board (FIN)
Remedy: MJ-1031 All Finisher controller PC board • Board check • Connector check (J104) • Harness check Entrance sensor • Sensor check • Is the inlet sensor working properly? (Check the movement of the actuator.)
MJ-1101 Transport sensor • Sensor check • Connector check (S2) • Harness check Finisher controller PC board Board check(CN22)
MJ-1106 Finisher Check if there is any paper in the finisher or on the transport path of the equipment and remove it if there is. Entrance sensor (S1) • Sensor check • Connector check • Harness check Finisher control PC board (FIN) • Board check • Connector check (CN26) • Harness check
MJ-1101 Transport sensor • Sensor check • Connector check (S2) • Harness check Finisher controller PC board Board check(CN22)
MJ-1106 Finisher Check if there is any paper in the finisher or on the transport path of the equipment and remove it if there is. Entrance sensor (S1) • Sensor check • Connector check • Harness check Finisher control PC board (FIN) • Board check • Connector check (CN26) • Harness check