Description: Punch motor abnormality: The punch motor is not rotating normally or the puncher is not moving normally. [MJ-1025 (when MJ-6005 is installed)]
Remedy: MJ-1025 Is the punch home position sensor (PI1P) working properly? NO Replace the sensor. YES Is the punch motor clock sensor (PI3P) working properly? NO Replace the sensor. YES Is the wiring between the finisher controller PC board and sensor correct? NO Correct the wiring. YES Is there any problem with the punching mechanism? YES Fix the mechanism. NO Replace Punch motor (M1P) Try replacing the punch controller PC board. Is the problem corrected? YES End. NO Replace the finisher controller PC board.