Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi CB12 — Toshiba e-Studio 2040c

Code: CB12

Description: Buffer roller drive motor abnormality: The buffer roller drive motor is not rotating or the buffer roller is not moving normally.
Causes: Buffer roller drive motor (M6) Finisher controller PC board
Remedy: MJ-1101 Buffer roller If there is mechanical problem when the buffer roller is rotated, fix the mechanism. Buffer roller drive motor (M6) Check the connectors and harnesses between the buffer roller drive motor (M6) and the finisher control PC board (CN18).
MJ-1106 Buffer roller Rotate the buffer roller. Fix any mechanical problem. Buffer roller drive motor Check if the connector (CN11) on the finisher controller PC board is disconnected from the buffer roller drive motor (M4) and the harnesses are open circuited. Correct if so.

← Xem tất cả mã lỗi Toshiba e-Studio 2040c

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie