Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E51 — Toshiba e-Studio 205

Code: E51

Description: Jam not reaching the ADU sensor: The paper does not reach the ADU sensor after is switchbacked the exit section.
Remedy: Open the ADU. there any paper front the ADU sensor?
YES Remove the paper. Is the ADU sensor working? (Perform the input check the test mode: 13-[04. SENSOR TEST])
NO 1) Check if either of the connectors CN251 on the ADU board is disconnected. 2) Check if the connector CN13 on the MAIN board is disconnected. 3) Check if the connector pins are disconnected and the harnesses are open circuited. 4) Check if the conductor patterns on the ADU board and MAIN board are short circuited or open circuited. 5) Replace the ADU board. 6) Replace the MAIN board.
YES Check the rollers the ADU. Replace them they are worn out.

← Xem tất cả mã lỗi Toshiba e-Studio 205

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie