Code: E3E0
Description: LCF transport jam (Paper not reaching the 2nd drawer feed sensor): Paper fed from the LCF and passed through the LCF feed sensor does not reach the 2nd drawer feed sensor.
Causes: 2nd drawer feed sensor Lower transport clutches (high/ low speed) PFP transport clutches LGC board PFP board Feed roller Replace it if it is worn out. Separation roller Replace it if it is worn out. Pickup roller Replace it if it is worn out. Transport roller Replace it if it is worn out.
Remedy: 2nd drawer feed sensor • Sensor check (Perform the input check: 03-[FAX]ON/[1]/[F]) • Connector check (CN348) • Harness check Lower transport clutches (high/ low speed) • Clutch check (Perform the output check: 03-230, 233) • Connector check (CN348) • Harness check PFP transport clutch • Clutch check (Perform the output check: 03-225) • Connector check (CN241, CN244, CN349) • Harness check LGC board • Board check • Connector check (CN348, CN349) • Harness check PFP board • Board check • Connector check (CN241, CN244) • Harness check