Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi ED14 — Toshiba e-Studio 2050c

Code: ED14

Description: Rear alignment plate home position error: The rear alignment plate is not at the home position. [MJ-1101/1106]
Causes: MJ-1101 Front alignment motor Front alignment plate home position sensor Finisher controller PC board
MJ-1106 Rear alignment plate home position sensor Finisher controller PC board
Remedy: MJ-1101 Rear alignment plate Move the Rear alignment plate. If there is any mechanical problem, fix its mechanism. Rear alignment motor Rear alignment plate home position sensor Finisher controller PC board Check if the connectors on the finisher controller PC board are disconnected from the Rear alignment plate home position sensor (S8) and the Rear alignment motor (M10), or the harnesses are open circuited. Correct if any.
MJ-1106 Rear alignment plate Move the rear alignment plate. Fix any mechanical problem. Rear alignment plate home position sensor Check if there is a disconnection of the connector, incorrect installation or breakage of the rear alignment plate home position sensor (S8). If there is, reinstall the sensor correctly or replace it. Check if the connector (CN18) on the finisher controller PC board is disconnected from the rear alignment plate home position sensor (S8) and the harnesses are open circuited. Correct if so. Rear alignment motor Check if the connector (CN17) on the finisher controller PC board is disconnected from the rear alignment motor (M6) and the harnesses are open circuited. Correct if so.

← Xem tất cả mã lỗi Toshiba e-Studio 2050c

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie