Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E3D0 — Toshiba e-Studio 2051c

Code: E3D0

Description: LCF transport jam (Paper not reaching the registration sensor): Paper fed from the LCF and passed through the 1st drawer feed sensor does not reach the registration sensor.
Causes: 1st drawer feed sensor Lower transport clutches (high/ low speed) LGC board Feed roller Replace it if it is worn out. Separation roller Replace it if it is worn out. Pickup roller Replace it if it is worn out. Transport roller Replace it if it is worn out
Remedy: 1st drawer feed sensor • Sensor check (Perform the input check: 03-[FAX]ON/[1]/[G]) • Connector check (CN337) • Harness check Lower transport clutches (high/ low speed) • Clutch check (Perform the output check: 03-230, 233) • Connector check (CN338) • Harness check LGC board • Board check • Connector check (CN337, CN348) • Harness check

← Xem tất cả mã lỗi Toshiba e-Studio 2051c

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie