Code: 6901
Display: Self-Diagnostic Turn the power off, then on again. Leave the machine for 15 min.
Description: An error occurred in the fuser unit when the power switch was turned ON or sleep mode was ended.
Remedy: 1 Connection failure of the fuser unit harnesses Reconnect each harness of the fuser unit. 2 Fuser unit failure Replace the fuser unit. 3 Low voltage power supply PCB failure Replace the low voltage power supply PCB unit. 4 Main PCB failure Replace the main PCB ASSY. Note: • Turn OFF the power switch. After the fuser unit has cooled sufficiently, turn ON the power switch again and leave the machine for ten minutes. This problem may then be cleared.