Description: Initialization error of the offset tray: The home position of the separator cannot be detected when the power is turned ON.
Remedy: (1) Check if each connector between the offset gate motor and MOT2 board (CN406) is disconnected. (2) Check if each connector between the MOT2 board (CN406) and LGC board (CN302) is disconnected. (3) Check if each connector pin is removed or the harness is broken. (4) Check if any conductor pattern on the MOT2 board and LGC board is short circuited or open circuited. (5) Replace the offset gate motor. (6) Replace the MOT2 board. (7) Replace the LGC board.