Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E40 — Toshiba e-Studio 206

Code: E40

Description: Transfer cover open jam: The transfer cover has opened during printing.
Remedy: Is the ADU cover open?
YES Remove paper if there is any, then close the cover.
NO Is the voltage of 24V being supplied from the power supply unit? (Perform the input check in the test mode: 03-[INTERRUPT]OFF/[8]/[6])
NO 1) Check if the connector for 24 V power supply is disconnected. 2) Check if the connector CN23 on the MAIN board is disconnected. 3) Check if the connector pins are disconnected and the harnesses are open circuited. 4) Check if the conductor pattern on the MAIN board is short circuited or open circuited. 5) Replace the MAIN board.
YES Replace the MAIN board.

← Xem tất cả mã lỗi Toshiba e-Studio 206

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie