Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 7300 — Brother DCP1511

Code: 7300

Display: Jam Tray Remove the jammed paper from Tray, then press Start.
Description: The paper feed sensor does not detect paper pass even after the paper has been fed for the specified time.
Remedy: • Remove the jammed paper. • Check that the paper is set in the paper tray correctly. • Check that there is not too much paper set in the paper tray. • Flip over the paper in the paper tray or rotate the paper 180 degrees. • Check that the thickness of the paper is within the standard. • Check that the size of the paper is within the standard. • Flip through the paper and reset it in the paper tray.
1 Foreign object in the front of the machine Remove the foreign object. 2 Gears around the plate up plate coming off Reattach gears around the plate up plate. 3 Attachment failure of the motor drive belt Reattach the motor drive belt. 4 Attachment failure of the laser shutter arm Reattach the laser shutter arm. 5 Connection failure of the main motor harness Reconnect the main motor harness. 6 Connection failure of the motor encoder PCB flat cable Reconnect the motor encoder PCB flat cable. 7 Connection failure of the pickup solenoid harness Reconnect the pick-up solenoid harness. 8 Motor drive belt failure Replace the motor drive belt. 9 Motor encoder PCB failure Replace the motor encoder PCB ASSY. 10 Low voltage power supply PCB failure Replace the low voltage power supply PCB unit. 11 Laser unit failure Replace the laser unit. 12 Main PCB failure Replace the main PCB ASSY.

← Xem tất cả mã lỗi Brother DCP1511

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie