Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C9E — Toshiba e-Studio 2100c

Code: C9E

Description: IMC board connection abnormal
Remedy: Is "Call for service" displayed again even after the copier is turned OFF and then back ON? N: Observe the condition for a while. Y: 1. Check if the IMC board, SYS board and the IMG board are firmly connected to the MTH1 board. 2. Check if the connector J181, J182, J185 or J188 on the IMC board is disconnected. 3. Check if the connector J161 on the IMG board is disconnected. 4. Check if the connector J1 on the SCM board is disconnected. 5. Check if the harness connected to the IMC board is open- or short-circuited or if any connector pin is disconnected. 6. Check if the harness between the SCM and IMG boards is open-circuited or if any connector pin is disconnected. 7. If this problem recurs frequently, replace the IMC board.

← Xem tất cả mã lỗi Toshiba e-Studio 2100c

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie