Code: CD5
Description: Saddle stitcher/sensor connector connection error
Remedy: [Procedure 1] Is the connector of guide home position sensor (PI13S) connected to the connector on the saddle stitcher controller PC board? N: Connect the two connectors. Y: Is the wiring between the sensor and the saddle stitcher correct? N: Correct the wiring. Y: Is 5V DC being supplied from J9-7 on the saddle stitcher controller PC board? N: Replace the saddle stitcher controller PC board. Y: Is J9-8 on the saddle stitcher controller PC board correctly connected to the ground? N: Replace the saddle stitcher controller PC board. Y: End
[Procedure 2] Is the connector of paper pushing plate home position sensor (PI14S) connected to the connector on the saddle stitcher controller PC board? N: Connect the two connectors. Y: Is the wiring between the sensor and the saddle stitcher correct? N: Correct the wiring. Y: Is 5V DC being supplied from J9-10 on the saddle stitcher controller PC board? N: Replace the saddle stitcher controller PC board. Y: Is J9-11 on the saddle stitcher controller PC board properly connected to the ground? N: Replace the saddle stitcher controller PC board. Y: End
[Procedure 3] Is the connector of paper pushing plate top position sensor (PI15S) connected to the connector on the saddle stitcher controller PC board? N: Connect the two connectors. Y: Is the wiring between the sensor and the saddle stitcher correct? N: Correct the wiring. Y: Is 5V DC being supplied from J9-13 on the saddle stitcher controller PC board? N: Replace the saddle stitcher controller PC board. Y: Is J9-14 on the saddle stitcher controller PC board properly connected to the ground? N: Replace the saddle stitcher controller PC board. Y: End
[Procedure 2] Is the connector of paper pushing plate home position sensor (PI14S) connected to the connector on the saddle stitcher controller PC board? N: Connect the two connectors. Y: Is the wiring between the sensor and the saddle stitcher correct? N: Correct the wiring. Y: Is 5V DC being supplied from J9-10 on the saddle stitcher controller PC board? N: Replace the saddle stitcher controller PC board. Y: Is J9-11 on the saddle stitcher controller PC board properly connected to the ground? N: Replace the saddle stitcher controller PC board. Y: End
[Procedure 3] Is the connector of paper pushing plate top position sensor (PI15S) connected to the connector on the saddle stitcher controller PC board? N: Connect the two connectors. Y: Is the wiring between the sensor and the saddle stitcher correct? N: Correct the wiring. Y: Is 5V DC being supplied from J9-13 on the saddle stitcher controller PC board? N: Replace the saddle stitcher controller PC board. Y: Is J9-14 on the saddle stitcher controller PC board properly connected to the ground? N: Replace the saddle stitcher controller PC board. Y: End