Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi CE2 — Toshiba e-Studio 211c

Code: CE2

Description: Image quality sensor abnormal (no pattern level)
Remedy: 1. Check that the transfer belt unit is fully raised. 2. Check that the transfer/transport unit is securely inserted. 3. Check for any abnormal stain, large flaw or break on the transfer belt surface. 4. Check that the drum and transfer belt are operating. If abnormal, correct any mechanical problem. Is any of the connectors J113, J114, J115,J119 or J123 on the LGC board disconnected? Is the connector J182 on the IMC board disconnected? Is the harness between the LGC board and the IMC board open-circuited? Is the connector of the image quality sensor disconnected or stained? Is the harness between the LGC board and the image quality sensor open-circuited? Is the main high-voltage transformer connector disconnected? Is the harness between the LGC board and the main high-voltage transformer open-circuited? Is the transfer transformer connector disconnected? Is the harness between the LGC board and the transfer transformer open-circuited? Is any of the high-voltage contact points of the transfer belt unit in faulty contact? Is any contact points stained? Is the harness of the main high-voltage transformer or the transfer transformer disconnected or open-circuited? Y: Reconnect the connector. Replace the harness. Clean the connector or contact point. Correct the contact point. N: Is LED (D17) on the LGC board lit? Is the output voltage from the 12V-power supply normal? Y: Check the power supply system, and replace the switching power supply. N: 1. Replace the image quality sensor. 2. Replace the LGC board. 3. Replace the IMC board.

← Xem tất cả mã lỗi Toshiba e-Studio 211c

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie