Code: CE3
Description: Abnormal image caused by poor charge
Remedy: Is the transfer belt stained with toner? Y: Clean the transfer belt. Does an error occur even after cleaning it? Y: Check and correct according to the following order. 1. Check that the main charger is securely installed. If not, correct it. 2. Check that the charger wire is not cut. If it is cut, replace it. 3. Check that the connector of the harness for the high voltage supply is securely connected or the harness is not abnormal. If there is any abnormality, correct it. 4. Check that 24 V is supplied to the high voltage power supply. If not, check that the harness between the high voltage power supply and the LGC is securely connected or that the harness is not abnormal. If it has any problem, correct it. 5. Replace the high voltage power supply. 6. Replace the LGC board. N: Does the transfer belt have any large flaw? Y: Replace the transfer belt. N: Is the color registration sensor stained? Y: Clean the emitting area of the color registration sensor. N: Check according to the following order. 1. Check that 12 V is supplied to the LGC board and the color registration sensor. If not, check that the harness and the connector between the color registration sensor and LGC, and between LGC and IMC are securely connected or the harness is not abnormal. 2. Replace the color registration sensor. 3. Replace the LGC board.