Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E73 — Toshiba e-Studio 212

Code: E73

Description: Stop jam the exit sensor: The trailing edge the original does not pass the exit sensor after its leading edge has reached this sensor.
Remedy: the exit roller stained?
YES Clean the roller. Is the exit sensor working? (Perform the input check: 13-[04. SENSOR TEST])
NO 1) Check if the connector of the exit sensor is disconnected. 2) Check if the connector CN75 on the ADF board is disconnected. 3) Check if the connector pins are disconnected or the harnesses are open circuited. 4) Check if the conductor pattern on the ADF board is short circuited or open circuited. 5) Replace the exit sensor. 6) Replace the ADF board.
YES Replace the ADF board.

← Xem tất cả mã lỗi Toshiba e-Studio 212

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie