Description: Cartridge motor 1 (top) not connected.
Remedy: 1 Turn the printer off, and remove the rear cover. Check the connector JCART1 for proper connection to the system card, the cable for pinch points, and the cable or connector for any other damage. Is the cable damaged? Replace the JCART1 cable. The cable parts packet contains one cartridge motor cable that works for either of the cartridge motors. Go to step 2. 2 Remove the right cover. Check for the following continuity between JCART1 and top cartridge connector. Go to step 3. Replace the JCART1 cable. The cable parts packet contains one cartridge motor cable that works for either of the cartridge motors. Is continuity present? 3 Replace the EP drive assembly. Does the error clear? Problem solved. Replace the system card.