Code: E14
Description: PFU drawer misfeeding (Paper not reaching the PFU feed sensor): The paper fed from the PFU drawer does not reach the PFU feed sensor.
Causes:
Remedy: Step Check Item Result Measure Next Step
1 Open the side cover. Is there any paper in front of the PFU feed sensor? Yes Remove the paper. 2 No 2 Is the PFU feed sensor working? (Perform the input check in the test mode: 03- [INTERRUPT]OFF/[7]/[5]) Yes 3 No 1. Check if the connector of the PFU feed sensor is disconnected. 2. Check if the connector CN4 on the MAIN board is disconnected. 3. Check if the connector pins are disconnected and the harnesses are open circuited. 4. Check if the conductor pattern on the MAIN board is short circuited or open circuited. 5. Replace the PFU feed sensor. 6. Replace the MAIN board. 3 Is the PFU pickup clutch working? (Perform the output check in the test mode: 04-202) Yes 4 No 1. Check if the connector of the PFU pickup clutch is disconnected. 2. Check if the connector CN4 on the MAIN board is disconnected. 3. Check if the connector pins are disconnected and the harnesses are open circuited. 4. Check if the conductor pattern on the MAIN board is short circuited or open circuited. 5. Replace the PFU pickup clutch. 6. Replace the MAIN board. 4 Check the PFU drawer paper feed roller. Replace it if it is worn out.
1 Open the side cover. Is there any paper in front of the PFU feed sensor? Yes Remove the paper. 2 No 2 Is the PFU feed sensor working? (Perform the input check in the test mode: 03- [INTERRUPT]OFF/[7]/[5]) Yes 3 No 1. Check if the connector of the PFU feed sensor is disconnected. 2. Check if the connector CN4 on the MAIN board is disconnected. 3. Check if the connector pins are disconnected and the harnesses are open circuited. 4. Check if the conductor pattern on the MAIN board is short circuited or open circuited. 5. Replace the PFU feed sensor. 6. Replace the MAIN board. 3 Is the PFU pickup clutch working? (Perform the output check in the test mode: 04-202) Yes 4 No 1. Check if the connector of the PFU pickup clutch is disconnected. 2. Check if the connector CN4 on the MAIN board is disconnected. 3. Check if the connector pins are disconnected and the harnesses are open circuited. 4. Check if the conductor pattern on the MAIN board is short circuited or open circuited. 5. Replace the PFU pickup clutch. 6. Replace the MAIN board. 4 Check the PFU drawer paper feed roller. Replace it if it is worn out.