Code: E44
Description: PFU cover open jam: The PFU cover has opened during printing.
Causes:
Remedy: Step Check Item Result Measure Next Step
1 Is the PFU cover open? Yes Remove the paper if there is any, then close the cover. 2 No 2 Is the PFU cover opening/ closing switch working? (Perform the input check in the test mode: 03- [INTERRUPT]OFF/[9]/[2]) Yes 3 No 1. Check if the connector of the PFU cover opening/ closing switch is disconnected. 2. Check if the connector CN4 on the MAIN board is disconnected. 3. Check if the connector pins are disconnected and the harnesses are open circuited. 4. Check if the conductor pattern on the MAIN board is short circuited or open circuited. 5. Replace the PFU cover opening/closing switch. 6. Replace the MAIN board. 3 Replace the MAIN board.
1 Is the PFU cover open? Yes Remove the paper if there is any, then close the cover. 2 No 2 Is the PFU cover opening/ closing switch working? (Perform the input check in the test mode: 03- [INTERRUPT]OFF/[9]/[2]) Yes 3 No 1. Check if the connector of the PFU cover opening/ closing switch is disconnected. 2. Check if the connector CN4 on the MAIN board is disconnected. 3. Check if the connector pins are disconnected and the harnesses are open circuited. 4. Check if the conductor pattern on the MAIN board is short circuited or open circuited. 5. Replace the PFU cover opening/closing switch. 6. Replace the MAIN board. 3 Replace the MAIN board.